How do I swap TIA (Celestia) for another coin?

Pick the TIA pair (for example TIA → SOL or TIA → ETH), get a live aggregated quote, paste your destination wallet address, choose a fixed or floating rate, then send your TIA from Keplr or Leap to the one-time deposit address. The output is delivered straight to your wallet once the TIA deposit confirms — no account needed.

Can I swap TIA without KYC?

Yes. Monivo is a non-custodial aggregator: for standard amounts you swap directly from wallet to wallet without an account or identity verification. Providers may request verification only on unusually large or flagged transactions, in line with their own compliance rules.

What is the best wallet for TIA (Celestia)?

Keplr and Leap are the most popular non-custodial wallets for Celestia. Both are available as browser extensions and mobile apps, let you hold your own keys, and support staking TIA. For larger balances, pair Keplr or Leap with a Ledger hardware wallet for cold storage.

How do I store TIA safely?

Hold TIA in a non-custodial wallet where you control the seed phrase — Keplr or Leap for everyday use, or a Ledger hardware wallet for long-term storage. Never share your 12/24-word recovery phrase, back it up offline, and double-check you're on the official wallet site before installing.

How long does a TIA swap take?

Plan for roughly 2–5 minutes end to end. Celestia produces blocks in about 12 seconds, so your TIA deposit is usually confirmed within 30–60 seconds. After that the swap executes and the receiving leg is sent: SOL typically lands in under a minute, while ETH can take 1–3 minutes depending on Ethereum congestion. Floating-rate swaps may take slightly longer in volatile markets because providers wait for full confirmation before releasing funds.

What are the fees to swap TIA?

There are three components, and Monivo shows the net result up front so you never guess. (1) The Celestia network fee on your TIA deposit is tiny — usually a fraction of a cent. (2) The receiving-chain fee (Solana is fractions of a cent; Ethereum gas is higher and is already reflected in the quote). (3) The provider spread, typically around 0.3–1%, baked into the rate. Monivo aggregates every connected provider and routes to the best executable rate with no added Monivo markup, so the amount displayed is exactly what arrives in your wallet.

How often does the TIA swap rate update?

On the quote screen the aggregated rate refreshes continuously — roughly every few seconds — so you always see a live, executable price. If you choose a fixed rate, that price is locked for about 10 minutes and a countdown shows the remaining time; if it expires before you send your TIA, you simply get a fresh quote. A floating rate isn't locked at all — it settles at the market price the moment your TIA deposit confirms, which is usually a little cheaper but can move slightly.

Can I swap TIA to SOL or ETH directly?

Yes. Monivo routes cross-chain swaps automatically, so you can send TIA from your Celestia wallet and receive SOL on Solana or ETH on Ethereum in a single non-custodial swap — no manual bridging required.

Do I need a Celestia wallet before I swap?

Yes — you need a wallet that holds TIA to send the deposit, and a wallet for the asset you're receiving. Set up Keplr or Leap, fund it with TIA, and have your destination address ready before starting the swap.

TIA (Celestia) wallet & swap guide

Want to swap or safely store Celestia (TIA)? This guide covers how to convert TIA to SOL, ETH and other assets with no account and no KYC, plus the best non-custodial wallets (Keplr and Leap) for holding and staking TIA.

No account · No KYC

Buy instantly — swap TIA in minutes

Jump straight into the pre-filled swap with a live aggregated rate. Send TIA from Keplr or Leap and receive your asset wallet-to-wallet.

Swap TIA → SOL now or swap TIA → ETH

TL;DR

• Store TIA in a non-custodial wallet you control — Keplr or Leap.
• Pick a TIA pair (TIA → SOL, TIA → ETH) and enter your amount.
• Get a live aggregated quote across providers.
• Paste your destination address, choose fixed or floating.
• Send TIA and receive your asset in minutes — no account, no KYC.

Swap TIA → SOL now

You Send

You Get

Aggregating providers

Best rate

+0.45% vs worst quote

You get

0.000232 SOL

via ChangeNOW~8 min

Best Price Guarantee

We compared 7 providers in real time

You save

+0.27%

+0.000001 SOL extra in your wallet

Best rate

7 offers

What is TIA (Celestia)?

TIA is the native token of Celestia, a modular data-availability network that lets developers launch their own blockchains (rollups) without bootstrapping a new consensus layer. TIA is used to pay for blob space (data availability), for staking to secure the network, and for governance. Because Celestia is a Cosmos-SDK chain, TIA lives in Cosmos-compatible wallets like Keplr and Leap and can be moved cross-chain through IBC and non-custodial swap routes.

Best non-custodial wallets for TIA

To hold, stake, or swap TIA you need a wallet where you control the keys. These are the most-used non-custodial options for Celestia:

Keplr
The most popular Cosmos wallet — browser extension and mobile app. Add the Celestia chain, hold and stake TIA, and sign swaps without giving up custody.
Leap
A fast, mobile-first Cosmos wallet with first-class Celestia support, easy staking, and a clean interface for managing TIA.
Cosmostation
A long-standing Cosmos wallet (mobile + extension) that supports Celestia, staking, and IBC transfers.
Ledger (hardware)
Cold storage for larger TIA balances — connect a Ledger to Keplr or Leap so your keys never leave the device.

Keep it safe: write your recovery phrase down offline, never paste it into a website, and only install wallets from their official sites. For meaningful balances, use a hardware wallet and keep the seed phrase off any internet-connected device.

Why swap TIA with a non-custodial aggregator?

No account, no KYC

Swap wallet-to-wallet for standard amounts without sign-up.

Non-custodial

Funds never sit on an exchange — they route directly to your wallet.

Fast settlement

Celestia finalizes deposits quickly, so most TIA swaps complete in minutes.

Best execution

Monivo aggregates live quotes and routes to the best rate with no added spread.

Step-by-step: swap TIA to SOL or ETH

Step 1
Choose the TIA pair you want
Set Celestia (TIA) as the asset you're sending and pick what you want to receive — SOL, ETH, USDT or any supported coin. Enter the amount of TIA and Monivo instantly shows the output after fees.
Step 2
Get a live aggregated quote
Monivo polls every connected non-custodial provider and surfaces the best executable rate for your TIA amount. The quote includes the network fee and the exact amount you'll receive — compare the net payout, not the headline rate.
Step 3
Paste your destination wallet address
Enter the receiving address for the asset you're buying (e.g. a Solana address for SOL or an EVM address for ETH). Paste, never type, and verify the first and last 6 characters before continuing.
Step 4
Pick a fixed or floating rate
A fixed rate locks the price for ~10 minutes so you know exactly how much you'll receive. A floating rate settles at the market price when your TIA deposit confirms and is usually slightly cheaper.
Step 5
Send your TIA deposit
Send the exact TIA amount from your Celestia wallet (Keplr, Leap, or a hardware wallet) to the one-time deposit address shown. Celestia transactions finalize quickly, so the deposit leg is typically confirmed within a minute or two.
Step 6
Receive your swapped asset
Once the TIA deposit confirms, the swap executes automatically and the output is pushed straight to your wallet — no account, no withdrawal step, no custody.

Fixed vs floating rate for TIA swaps

A fixed rate locks the amount you'll receive for around 10 minutes — best when you want certainty. A floating rate settles at the market price when your TIA deposit confirms and is usually a little cheaper, but the final amount can vary. In volatile conditions, a fixed rate is the safer choice.

Staying safe when you swap TIA

Use a wallet you control. Keep TIA in Keplr, Leap, or a hardware wallet — never leave it on a centralized exchange you don't need.
Verify the destination address (first and last 6 characters) and only swap from the official Monivo URL — search-ad phishing is common in crypto.
Start with a small test amount the first time you send to a new wallet or pair.
Protect your seed phrase. No legitimate service will ever ask for your recovery phrase — anyone who does is a scammer.

TIA swap & wallet FAQ

Still deciding? Open the pre-filled swap and watch the live rate update before you commit.

Swap TIA → SOL TIA → ETH

Next guides

Continue exploring related non-custodial swaps and the Celestia ecosystem.

Swap ETH to SOLMove between the two assets most TIA holders rotate into — non-custodial, no account.Read guide Swap SOL to USDTLock in gains by converting SOL to a stablecoin in minutes.Read guide Swap ETH to USDTCash out ETH to USDT with aggregated best-rate routing.Read guide

Celestia & Cosmos ecosystem

Celestia (TIA)Cosmos (ATOM)Injective (INJ)Solana (SOL)Ethereum (ETH)

Related crypto guides

Ready to swap TIA?

Open the pre-filled swap and compare the live aggregated rate — no account, no custody, best execution by default.

Swap TIA → SOL Swap TIA → ETH instead TIA price & details

Canonical: https://monivo.io/guides/tia-wallet-guide